20 years rigid box making machine manufacturer, positioning machine, corner pasting machine, grooving machine, forming machine ect. factory
Dongguan Longxingjian Intelligent Equipment Co., Ltd.
info@lxjmec.com
+86-13829162915
 |
| Quantity: | |
|---|---|
LS-1200B
longxingsheng
LS-1200B applies belt feeding system and double opening and closing system to ensure constant and accurate feeding of cardboard to the slotting area. In the grooving area, it applies a large roller with a diameter of 60 cm and a press belt to convey the pallet through the grooving blade. After completion, the conveyor will send the fluted cardboard to the front side, and the corner waste and groove waste will be sent to the back side.
This roll groover has been started in 2012 and is popular in the packaging industry now. It is ideal equipment for slotting cardboard, MDF board and thin paper.
1. The pressure roller continuously feeds the paper, and completes the plate milling process at one time.
2. Milling grooves on the reverse side makes the paper dust fall under the platen, and uses the sealed suction mechanism to suck the paper dust into the cloth bag.
3. It can mill gray cardboard, fine corrugated cardboard, honeycomb cardboard, MDF, and adjust the height of the pressing roller according to the thickness of the cardboard without adjusting the height of the cutter. The structure is reasonable and the operation is convenient.
4. Small model, small footprint, low power consumption, high efficiency, and cost savings.
5. Triangular, quadrangular and hexagonal rhombus boxes can be processed.
Grooving effect: V-groove surface is smooth, no dust, no noise.
6. Quick adjustment: the slotting angle can be adjusted arbitrarily through the handle 70-140 degrees! The groove depth can be adjusted arbitrarily! No need to change the tool, fast.
LS-1200B applies belt feeding system and double opening and closing system to ensure constant and accurate feeding of cardboard to the slotting area. In the grooving area, it applies a large roller with a diameter of 60 cm and a press belt to convey the pallet through the grooving blade. After completion, the conveyor will send the fluted cardboard to the front side, and the corner waste and groove waste will be sent to the back side.
This roll groover has been started in 2012 and is popular in the packaging industry now. It is ideal equipment for slotting cardboard, MDF board and thin paper.
1. The pressure roller continuously feeds the paper, and completes the plate milling process at one time.
2. Milling grooves on the reverse side makes the paper dust fall under the platen, and uses the sealed suction mechanism to suck the paper dust into the cloth bag.
3. It can mill gray cardboard, fine corrugated cardboard, honeycomb cardboard, MDF, and adjust the height of the pressing roller according to the thickness of the cardboard without adjusting the height of the cutter. The structure is reasonable and the operation is convenient.
4. Small model, small footprint, low power consumption, high efficiency, and cost savings.
5. Triangular, quadrangular and hexagonal rhombus boxes can be processed.
Grooving effect: V-groove surface is smooth, no dust, no noise.
6. Quick adjustment: the slotting angle can be adjusted arbitrarily through the handle 70-140 degrees! The groove depth can be adjusted arbitrarily! No need to change the tool, fast.
