 |
| Quantity: | |
|---|---|
LS-1200B
longxingsheng
LS-1200B automatic cardboard grooving machine is used for V-shaped grooving of corrugated board. 80 to 140 degree V groove processing is possible. You can open up to 8 slots at a time (depending on cardboard size). The fastest working speed of this machine is 40m/min, about 100-200 pcs/min.
Adopting a belt feeding method and a double opening/closing method, the cardboard is continuously and accurately fed into the slotting area. In the slotting area, large rollers with a diameter of 60 cm and press belts are used to transport the pallets through the slotting blades. When complete, the conveyor sends fluted cardboard to the front of the machine and corner waste and fluted waste to the rear.
Launched in 2012, this roll groover is now very popular in the packaging industry. Optimal equipment for grooving cardboard, MDF, and thin paper.
Machine model | LS-1200B |
Quantity of groove at a time | 8 slots |
Working speed | 40m/min(100-200pcs/min) |
Cardboard size | 140*120-1000*600mm |
Cardboard thickness | 1-4mm |
Motor power | 2kw/380v |
Machine dimension | L2050*W1600*H1350mm |
Machine weight | 1430kg |
1. The press roller feeds the paper continuously, and the processing is completed in one processing.
2. The milled groove on the back side allows the paper dust to fall under the pressure plate, and the sealed suction mechanism sucks the paper dust into the cloth bag.
3. It can mill gray corrugated board, fine corrugated board, honeycomb corrugated board and MDF, and the press roller height can be adjusted according to the thickness of the corrugated board without adjusting the height of the cutter. Reasonable structure and convenient operability.
4. Small model, space saving, low power consumption, high efficiency, cost reduction.
5. Triangular, square and hexagonal rhombus boxes can also be processed.
6. Grooving effect: V-groove surface is smooth, no dust and no noise.
7. Quick adjustment: The slot angle can be adjusted arbitrarily from 80 to 140 degrees via the handle. The depth of the groove can be adjusted arbitrarily! No need to change tools and it's fast.
8. Durable Knives: Both cardboard and MDF can be used, and a knife sharpener is also provided, allowing you to sharpen two knives at the same time for faster sharpening speed.
9. Energy saving and environmental protection: The output of the whole machine is 1.5KW, and the slot waste can be recycled as a whole.
10. Flexible and convenient: The machine occupies a small area, flexible and convenient to move.
LS-1200B automatic cardboard grooving machine is used for V-shaped grooving of corrugated board. 80 to 140 degree V groove processing is possible. You can open up to 8 slots at a time (depending on cardboard size). The fastest working speed of this machine is 40m/min, about 100-200 pcs/min.
Adopting a belt feeding method and a double opening/closing method, the cardboard is continuously and accurately fed into the slotting area. In the slotting area, large rollers with a diameter of 60 cm and press belts are used to transport the pallets through the slotting blades. When complete, the conveyor sends fluted cardboard to the front of the machine and corner waste and fluted waste to the rear.
Launched in 2012, this roll groover is now very popular in the packaging industry. Optimal equipment for grooving cardboard, MDF, and thin paper.
Machine model | LS-1200B |
Quantity of groove at a time | 8 slots |
Working speed | 40m/min(100-200pcs/min) |
Cardboard size | 140*120-1000*600mm |
Cardboard thickness | 1-4mm |
Motor power | 2kw/380v |
Machine dimension | L2050*W1600*H1350mm |
Machine weight | 1430kg |
1. The press roller feeds the paper continuously, and the processing is completed in one processing.
2. The milled groove on the back side allows the paper dust to fall under the pressure plate, and the sealed suction mechanism sucks the paper dust into the cloth bag.
3. It can mill gray corrugated board, fine corrugated board, honeycomb corrugated board and MDF, and the press roller height can be adjusted according to the thickness of the corrugated board without adjusting the height of the cutter. Reasonable structure and convenient operability.
4. Small model, space saving, low power consumption, high efficiency, cost reduction.
5. Triangular, square and hexagonal rhombus boxes can also be processed.
6. Grooving effect: V-groove surface is smooth, no dust and no noise.
7. Quick adjustment: The slot angle can be adjusted arbitrarily from 80 to 140 degrees via the handle. The depth of the groove can be adjusted arbitrarily! No need to change tools and it's fast.
8. Durable Knives: Both cardboard and MDF can be used, and a knife sharpener is also provided, allowing you to sharpen two knives at the same time for faster sharpening speed.
9. Energy saving and environmental protection: The output of the whole machine is 1.5KW, and the slot waste can be recycled as a whole.
10. Flexible and convenient: The machine occupies a small area, flexible and convenient to move.
