-
- Automatic Rigid Box Making Machine
Share to:
Automatic Food & Toy & Moon Case & Watch & Phone Box Cover Paper Gluing Machine
This machine mainly used for gluing of various boxes. It use PLC system to operate simply. The working principle of the automatic paper gluing machine . The working principle of the automatic paper-gluing machine is that after the power is turned on, the whole conveyor belt starts to move, and the die-cut semi-finished cartons are placed in the paper feeding position of the folder-gluer, and the single cartons are automatically moved by the conveyor belt according to the position of the paper stop head frame. The set paper feeder is sent to the middle belt, and the conveyor belt transports the carton to the rear gluer for pressure packaging.Quantity: -
LS-650A
-
longxingsheng
LS-650A introduce
LS-650A is a gluing machine used for the gluing process in the carton making process. It uses vacuum suction to blow the front end of the paper, and the conveying is smooth and precise. The main engine is equipped with frequency conversion speed regulation function, and is equipped with automatic heating and constant temperature system with timing start. A strong suction device is installed on the conveyor belt to avoid bending, deformation or shifting of the paper after gluing. This machine is suitable for hot-melt glue and cold glue, and can ensure uniform glue application, no wrinkle, and less recycling waste, thereby improving production efficiency and saving costs.
This machine can glue the facial tissue with the largest facial tissue size of 600mm, and the fastest speed can reach 75 facial tissue per minute
Machine parameters:
Type
LS-650A
Paper width
W80~600mm
Paper thickness
80~250g
Working speed
7~40pcs/min
Voltage supply
380v 3 phase
Motor Power
7.45 kw
Machine dimension
L6350*W1650*H1100mm
Machine weight
1096kg
Machine feature:
The paper is fed by push-back to ensure that the paper is smooth and not skewed.
Using PCL control system, the operation is simple and convenient.
The glue bucket is designed to keep the glue in use.
Conveyor belt can be stopped and positioned
maintenance:
Keep the machine clean and clean it regularly.
Wipe the machine belt with clean water to prevent slipping and sticking.
Clean the rubber wheel and the rubber box on the bottom of the hook every day to avoid the glue from freezing and affecting the gluing effect.
Keep the glue box of the gluing part clean and clean frequently.
It is strictly forbidden to adjust the governor when the machine is stopped to prevent severe belt wear.
Clean the inner row plate supports, shafts, and rods frequently, and apply a mixture of oil and butter to prevent rust.
Before turning on the machine, run it at a slow speed and check whether there is any abnormality in the machine.
Please note: the above parameters are for reference only, the actual product may be adjusted and changed.
LS-650A introduce
LS-650A is a gluing machine used for the gluing process in the carton making process. It uses vacuum suction to blow the front end of the paper, and the conveying is smooth and precise. The main engine is equipped with frequency conversion speed regulation function, and is equipped with automatic heating and constant temperature system with timing start. A strong suction device is installed on the conveyor belt to avoid bending, deformation or shifting of the paper after gluing. This machine is suitable for hot-melt glue and cold glue, and can ensure uniform glue application, no wrinkle, and less recycling waste, thereby improving production efficiency and saving costs.
This machine can glue the facial tissue with the largest facial tissue size of 600mm, and the fastest speed can reach 75 facial tissue per minute
Machine parameters:
Type
LS-650A
Paper width
W80~600mm
Paper thickness
80~250g
Working speed
7~40pcs/min
Voltage supply
380v 3 phase
Motor Power
7.45 kw
Machine dimension
L6350*W1650*H1100mm
Machine weight
1096kg
Machine feature:
The paper is fed by push-back to ensure that the paper is smooth and not skewed.
Using PCL control system, the operation is simple and convenient.
The glue bucket is designed to keep the glue in use.
Conveyor belt can be stopped and positioned
maintenance:
Keep the machine clean and clean it regularly.
Wipe the machine belt with clean water to prevent slipping and sticking.
Clean the rubber wheel and the rubber box on the bottom of the hook every day to avoid the glue from freezing and affecting the gluing effect.
Keep the glue box of the gluing part clean and clean frequently.
It is strictly forbidden to adjust the governor when the machine is stopped to prevent severe belt wear.
Clean the inner row plate supports, shafts, and rods frequently, and apply a mixture of oil and butter to prevent rust.
Before turning on the machine, run it at a slow speed and check whether there is any abnormality in the machine.
Please note: the above parameters are for reference only, the actual product may be adjusted and changed.
